The air conditioning filter is very important in preventing the build up of dust, grease and other little fragments within the air conditioning unit itself. Without the filter, all the dust and debris that are caught by the filter would be transferred straight onto the fins, resulting in that area becoming clogged, and shut. When the air flow is limited around the cooling area, the system is simply not able to produce cold air. In addition, without the air conditioning filter, the debris and dust would stick to the fins as they are damp due to the moisture produced in the cooling process, particularly in damp environments. This can and will cause bacteria growth in the system, that in turn, blows this bacteria back into the air that you are inhaling.
Cleaning the window air conditioning filter on a regular basis not only helps with cooling, but also helps with the efficiency of the system. A good idea is to cleanse the filter before switching on the air conditioner in the spring, then again every 3 to four weeks while the system is being used. If you live in an area where there is lots of fine dust, smokers in your house may find that cleaning the air conditioning filter every 2 weeks is also more beneficial.
Window air conditioning filters are the simplest to cleanse and are normally made from either a durable foam kind of material or a fine mesh. The most common and advised kind of filter is made from polypropylene, which is actually electrostatic and will trap little particles. To cleanse these kinds of mesh screens, simply wash in warm soapy water and rinse well. Always permit the filter to completely dry before putting it back in the unit. Foam filters should be changed with a new filter that can be made at home from foam sheets bought at a home supply shop Air Conditioning Repair Tucson Arizona .
A big outside standard air conditioning filter can be cleaned with commercial solutions, nevertheless, they commonly are not as effective after they have been cleaned. A better choice is to just get rid of and replace the big filters every 2 months of use. Brush the fins of the outside unit that are located behind the filters and get rid of all debris and dust either by blowing with compressed air or using a shop vacuum. Always keep the location around the outside unit free from long grass, shrubs or vines that could impair air flow or add debris into the unit or filter.